<em id="jh6lk"></em>
<tbody id="jh6lk"></tbody>
<th id="jh6lk"><pre id="jh6lk"></pre></th>

<s id="jh6lk"></s>
  • <rp id="jh6lk"></rp>
  • <tbody id="jh6lk"></tbody>
    歡迎光臨深圳市晶聯訊電子有限公司官網平臺
    當前位置
    首頁 > 新聞中心 > 產品知識
    中文字庫液晶模塊的例程
    2018/1/31 18:02:43

    中文字庫液晶模塊12864示例程序范例:

     

    //液晶屏型號:JLX12864G-086-PC-3S
    //接口:串行
    //中文字庫:帶中文字庫IC:JLX-GB2312,豎置橫排
    //驅動IC:UC1701X(與ST7565R兼容)
    //主板:89C516-001老主板
    //單片機:51系列
    //版權所有:深圳市晶聯訊電子有限公司:網址  http://www.www.sumanrai.com;
    //編程:葉建人,2013年10月11日  


    #include
    #include


    sbit lcd_sclk=P3^2;  //接口定義:lcd_sclk就是LCD的SCLK
    sbit lcd_sid=P3^1;   //接口定義:lcd_sid就是LCD的SDA
    sbit lcd_rs=P3^0;    //接口定義:lcd_rs就是LCD的RS,也叫“CD”
    sbit lcd_reset=P1^0; //接口定義:lcd_reset就是LCD的RESET
    sbit lcd_cs1=P1^1;   //接口定義:lcd_cs1就是LCD的CS1

    sbit Rom_IN=P1^2;    //字庫IC接口定義:Rom_IN就是字庫IC的SI
    sbit Rom_OUT=P1^3;   //字庫IC接口定義:Rom_OUT就是字庫IC的SO
    sbit Rom_SCK=P1^4;   //字庫IC接口定義:Rom_SCK就是字庫IC的SCK
    sbit Rom_CS=P1^5;    //字庫IC接口定義Rom_CS就是字庫IC的CS#

    sbit key=P2^0;  //定義一個按鍵

    #define uchar unsigned char
    #define uint unsigned int
    #define ulong unsigned long

    uchar code bmp1[];

    uchar code jiong1[]={//  文字:  囧 
    //  宋體12;  此字體下對應的點陣為:寬x高=16x16  
    0x00,0xFE,0x82,0x42,0xA2,0x9E,0x8A,0x82,0x86,0x8A,0xB2,0x62,0x02,0xFE,0x00,0x00,
    0x00,0x7F,0x40,0x40,0x7F,0x40,0x40,0x40,0x40,0x40,0x7F,0x40,0x40,0x7F,0x00,0x00};

    uchar code lei1[]={//  文字:  畾 
    //  宋體12;  此字體下對應的點陣為:寬x高=16x16  
    0x80,0x80,0x80,0xBF,0xA5,0xA5,0xA5,0x3F,0xA5,0xA5,0xA5,0xBF,0x80,0x80,0x80,0x00,
    0x7F,0x24,0x24,0x3F,0x24,0x24,0x7F,0x00,0x7F,0x24,0x24,0x3F,0x24,0x24,0x7F,0x00};


    //延時
    void delay(int n_ms)              
    {
     int j,k;
     for(j=0;j for(k=0;k<110;k++);
    }
    //短延時
    void delay_us(int n_us)              
    {
     int j,k;
     for(j=0;j for(k=0;k<1;k++);
    }

    //等待一個按鍵,我的主板是用P2.0與GND之間接一個按鍵
    void waitkey()
    {
    repeat:
       if (key==1) goto repeat;
     else delay(600);
    }

     

    //寫指令到LCD模塊
    void transfer_command_lcd(int data1)  
    {
     char i;
     lcd_cs1=0;
     lcd_rs=0;
     for(i=0;i<8;i++)
       {
      lcd_sclk=0;
      //delay_us(10);  //加少量延時
      if(data1&0x80) lcd_sid=1;
      else lcd_sid=0;
      lcd_sclk=1;
      //delay_us(10);  //加少量延時
       data1=data1<<=1;
       }
     lcd_cs1=1;
    }

    //寫數據到LCD模塊
    void transfer_data_lcd(int data1)
    {
     char i;
     lcd_cs1=0;
     lcd_rs=1;
     for(i=0;i<8;i++)
     {
      lcd_sclk=0;
      if(data1&0x80) lcd_sid=1;
      else lcd_sid=0;
      lcd_sclk=1;
      data1=data1<<=1;
     }
     lcd_cs1=1;
    }

     


    //LCD模塊初始化
    void initial_lcd()
    {
     lcd_reset=0;          //低電平復位
     delay(100);
     lcd_reset=1;       //復位完畢
     delay(100);       
     transfer_command_lcd(0xe2);  //軟復位
     delay(5);
     transfer_command_lcd(0x2c);  //升壓步聚1
     delay(50); 
     transfer_command_lcd(0x2e);  //升壓步聚2
     delay(50);
     transfer_command_lcd(0x2f);  //升壓步聚3
     delay(5);
     transfer_command_lcd(0x23);  //粗調對比度,可設置范圍0x20~0x27
     transfer_command_lcd(0x81);  //微調對比度
     transfer_command_lcd(0x28);  //微調對比度的值,可設置范圍0x00~0x3f
     transfer_command_lcd(0xa2);  //1/9偏壓比(bias)
     transfer_command_lcd(0xc8);  //行掃描順序:從上到下
     transfer_command_lcd(0xa0);  //列掃描順序:從左到右
     transfer_command_lcd(0x40);  //起始行:第一行開始
     transfer_command_lcd(0xaf);  //開顯示
    }

    void lcd_address(uint page,uint column)
    {
     column=column-0x01;
     transfer_command_lcd(0xb0+page-1);   //設置頁地址,每8行為一頁,全屏共64行,被分成8頁
     transfer_command_lcd(0x10+(column>>4&0x0f)); //設置列地址的高4位
     transfer_command_lcd(column&0x0f); //設置列地址的低4位 
    }

    //全屏清屏
    void clear_screen()
    {
     unsigned char i,j;
     
      
     for(i=0;i<9;i++)
     {
      transfer_command_lcd(0xb0+i);
      transfer_command_lcd(0x10);
      transfer_command_lcd(0x00);
      for(j=0;j<132;j++)
      {
         transfer_data_lcd(0x00);
      }
     }
    }

    //顯示128x64點陣圖像
    void display_128x64(uchar *dp)
    {
     uint i,j;
     
     for(j=0;j<8;j++)
     {
      lcd_address(j+1,1);
      for (i=0;i<128;i++)
      { 
       transfer_data_lcd(*dp);     //寫數據到LCD,每寫完一個8位的數據后列地址自動加1
       dp++;
      }
     }
    }


    //顯示16x16點陣圖像、漢字、生僻字或16x16點陣的其他圖標
    void display_graphic_16x16(uchar page,uchar column,uchar *dp)
    {
     uint i,j;
     for(j=0;j<2;j++)
     {
      lcd_address(page+j,column);
      for (i=0;i<16;i++)
      { 
       transfer_data_lcd(*dp);     //寫數據到LCD,每寫完一個8位的數據后列地址自動加1
       dp++;
      }
     }
    }


    //顯示8x16點陣圖像、ASCII, 或8x16點陣的自造字符、其他圖標
    void display_graphic_8x16(uchar page,uchar column,uchar *dp)
    {
     uint i,j;
     for(j=0;j<2;j++)
     {
      lcd_address(page+j,column);
      for (i=0;i<8;i++)
      { 
       transfer_data_lcd(*dp);     //寫數據到LCD,每寫完一個8位的數據后列地址自動加1
       dp++;
      }
     }
    }


    //顯示5X8點陣圖像、ASCII, 或5x8點陣的自造字符、其他圖標
    void display_graphic_5x8(uchar page,uchar column,uchar *dp)
    {
     uint i;
     lcd_address(page,column);
     for (i=0;i<6;i++)
     { 
      transfer_data_lcd(*dp);
      dp++;
     }
     
    }

    //送指令到晶聯訊字庫IC
    void send_command_to_ROM( uchar datu )
    {
     uchar i;
     for(i=0;i<8;i++ )
     {
      Rom_SCK=0;
      delay_us(10);
      if(datu&0x80)Rom_IN = 1;
      else Rom_IN = 0;
      datu = datu<<1;
      Rom_SCK=1;
      delay_us(10);
     }
    }

    //從晶聯訊字庫IC中取漢字或字符數據(1個字節)
    static uchar get_data_from_ROM( )
    {
     uchar i;
     uchar ret_data=0;
     for(i=0;i<8;i++)
     {
      Rom_OUT=1;
      Rom_SCK=0;
      //delay_us(1);
      ret_data=ret_data<<1;
      if( Rom_OUT )
       ret_data=ret_data+1;
      else
       ret_data=ret_data+0;
      Rom_SCK=1;
      //delay_us(1);
     }
     return(ret_data);
    }


    //從指定地址讀出數據寫到液晶屏指定(page,column)座標中
    void get_and_write_16x16(ulong fontaddr,uchar page,uchar column)
    {
     uchar i,j,disp_data;
     Rom_CS = 0;
     send_command_to_ROM(0x03);
     send_command_to_ROM((fontaddr&0xff0000)>>16);  //地址的高8位,共24位
     send_command_to_ROM((fontaddr&0xff00)>>8);   //地址的中8位,共24位
     send_command_to_ROM(fontaddr&0xff);     //地址的低8位,共24位
     for(j=0;j<2;j++)
     {
      lcd_address(page+j,column);
      for(i=0; i<16; i++ )
         {
       disp_data=get_data_from_ROM();
       transfer_data_lcd(disp_data); //寫數據到LCD,每寫完1字節的數據后列地址自動加1
      }
     }
     Rom_CS=1;
    }

    //從指定地址讀出數據寫到液晶屏指定(page,column)座標中
    void get_and_write_8x16(ulong fontaddr,uchar page,uchar column)
    {
     uchar i,j,disp_data;
     Rom_CS = 0;
     send_command_to_ROM(0x03);
     send_command_to_ROM((fontaddr&0xff0000)>>16);  //地址的高8位,共24位
     send_command_to_ROM((fontaddr&0xff00)>>8);   //地址的中8位,共24位
     send_command_to_ROM(fontaddr&0xff);     //地址的低8位,共24位
     for(j=0;j<2;j++)
     {
      lcd_address(page+j,column);
      for(i=0; i<8; i++ )
         {
       disp_data=get_data_from_ROM();
       transfer_data_lcd(disp_data); //寫數據到LCD,每寫完1字節的數據后列地址自動加1
      }
     }
     Rom_CS=1;
    }

    //從指定地址讀出數據寫到液晶屏指定(page,column)座標中
    void get_and_write_5x8(ulong fontaddr,uchar page,uchar column)
    {
     uchar i,disp_data;
     Rom_CS = 0;
     send_command_to_ROM(0x03);
     send_command_to_ROM((fontaddr&0xff0000)>>16);  //地址的高8位,共24位
     send_command_to_ROM((fontaddr&0xff00)>>8);   //地址的中8位,共24位
     send_command_to_ROM(fontaddr&0xff);     //地址的低8位,共24位
     lcd_address(page,column);
     for(i=0; i<5; i++ )
     {
      disp_data=get_data_from_ROM();
      transfer_data_lcd(disp_data); //寫數據到LCD,每寫完1字節的數據后列地址自動加1
     }
     Rom_CS=1;
    }


    //****************************************************************


    ulong  fontaddr=0;
    void display_GB2312_string(uchar page,uchar column,uchar *text)
    {
     uchar i= 0;   
     while((text[i]>0x00))
     {
      if(((text[i]>=0xb0) &&(text[i]<=0xf7))&&(text[i+1]>=0xa1))
      {      
       //國標簡體(GB2312)漢字在晶聯訊字庫IC中的地址由以下公式來計算:
       //Address = ((MSB - 0xB0) * 94 + (LSB - 0xA1)+ 846)*32+ BaseAdd;BaseAdd=0
       //由于擔心8位單片機有乘法溢出問題,所以分三部取地址
       fontaddr = (text[i]- 0xb0)*94;
       fontaddr += (text[i+1]-0xa1)+846;
       fontaddr = (ulong)(fontaddr*32);

       get_and_write_16x16(fontaddr,page,column);  //從指定地址讀出數據寫到液晶屏指定(page,column)座標中
       i+=2;
       column+=16;
      }
      else if(((text[i]>=0xa1) &&(text[i]<=0xa3))&&(text[i+1]>=0xa1))
      {      
       //國標簡體(GB2312)15x16點的字符在晶聯訊字庫IC中的地址由以下公式來計算:
       //Address = ((MSB - 0xa1) * 94 + (LSB - 0xA1))*32+ BaseAdd;BaseAdd=0
       //由于擔心8位單片機有乘法溢出問題,所以分三部取地址
       fontaddr = (text[i]- 0xa1)*94;
       fontaddr += (text[i+1]-0xa1);
       fontaddr = (ulong)(fontaddr*32);
     
       get_and_write_16x16(fontaddr,page,column);  //從指定地址讀出數據寫到液晶屏指定(page,column)座標中
       i+=2;
       column+=16;
      }
      else if((text[i]>=0x20) &&(text[i]<=0x7e)) 
      {         
       fontaddr = (text[i]- 0x20);
       fontaddr = (unsigned long)(fontaddr*16);
       fontaddr = (unsigned long)(fontaddr+0x3cf80);   

       get_and_write_8x16(fontaddr,page,column);  //從指定地址讀出數據寫到液晶屏指定(page,column)座標中
       i+=1;
       column+=8;
      }
      else
       i++; 
     }
     
    }

    void display_string_5x8(uchar page,uchar column,uchar *text)
    {
     unsigned char i= 0;
     while((text[i]>0x00))
     {
      
      if((text[i]>=0x20) &&(text[i]<=0x7e)) 
      {      
       fontaddr = (text[i]- 0x20);
       fontaddr = (unsigned long)(fontaddr*8);
       fontaddr = (unsigned long)(fontaddr+0x3bfc0);   


       get_and_write_5x8(fontaddr,page,column);  //從指定地址讀出數據寫到液晶屏指定(page,column)座標中

       i+=1;
       column+=6;
      }
      else
      i++; 
     }
    }


    //===============main program===================
    void main(void)
    {    
     while(1)
     {
      initial_lcd(); 
      clear_screen();    //clear all dots
      display_128x64(bmp1);
      delay(2000);  
      display_GB2312_string(1,1,"12864,帶中文字庫"); //在第1頁,第1列,顯示一串16x16點陣漢字或8x16的ASCII字
      display_GB2312_string(3,1,"16X16簡體漢字庫,");  //顯示一串16x16點陣漢字或8x16的ASCII字.以下雷同
      display_GB2312_string(5,1,"或8X16點陣ASCII,");
      display_GB2312_string(7,1,"或5x8點陣ASCII碼");         
      delay(4000);
      clear_screen(); 
      display_GB2312_string(1,1,"晶聯訊成立于二零"); 
      display_GB2312_string(3,1,"零四年十一月七日"); 
      display_GB2312_string(5,1,"主要生產液晶模塊"); 
      display_GB2312_string(7,1,"品質至上真誠服務"); 
      delay(4000);   
      display_GB2312_string(1,1,"GB2312簡體字庫及"); 
      display_GB2312_string(3,1,"有圖型功能,可自"); 
      display_GB2312_string(5,1,"編大字或圖像或生"); 
      display_GB2312_string(7,1,"僻字,例如:    ");
      display_graphic_16x16(7,97,jiong1);     //在第7頁,第81列顯示單個自編生僻漢字“囧”
      display_graphic_16x16(7,113,lei1);     //顯示單個自編生僻漢字"畾“
      delay(4000);  
      clear_screen();   
      display_GB2312_string(1,1,"  display_string_5x8(3,1,"  display_string_5x8(4,1,"JLX electronics Co., ");//顯示一串5x8點陣的ASCII字
      display_string_5x8(5,1,"Ltd. established at  ");//顯示一串5x8點陣的ASCII字 
      display_string_5x8(6,1,"year 2004.Focus LCM. ");//顯示一串5x8點陣的ASCII字
      display_string_5x8(7,1,"TEL:0755-29784961    ");//顯示一串5x8點陣的ASCII字
      display_string_5x8(8,1,"FAX:0755-29784964    ");//顯示一串5x8點陣的ASCII字
      delay(4000);
      display_GB2312_string(1,1,"啊阿埃挨哎唉哀皚"); //在第1頁,第1列,顯示一串16x16點陣漢字或8x16的ASCII字
      display_GB2312_string(3,1,"癌藹矮艾礙愛隘鞍");  //顯示一串16x16點陣漢字或8x16的ASCII字.以下雷同
      display_GB2312_string(5,1,"氨安俺按暗岸胺案");
      display_GB2312_string(7,1,"骯昂盎凹敖熬翱襖");         
      delay(4000); 
      display_GB2312_string(1,1,"鬟鬣麼麾縻麂麇麈");
      display_GB2312_string(3,1,"麋麒鏖麝麟黛黜黝");
      display_GB2312_string(5,1,"黠黟黢黷黧黥黲黯");
      display_GB2312_string(7,1,"鼢鼬鼯鼴鼷鼽鼾齄");         
      delay(4000);
     }
    }

    uchar code bmp1[]={
    //  調入了一幅圖像:D:\我的文檔\My Pictures\12864-555.bmp 
    //  寬度x高度=128x64 
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x80,0x80,0xC0,0xC0,0xC0,0xC0,0xE0,0x60,0xE0,0xE0,0xE0,0xE0,0x60,
    0x60,0x60,0x60,0x60,0x60,0x60,0xE0,0xE0,0xE0,0xE0,0xC0,0xC0,0xC0,0xC0,0x80,0x80,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xC0,0xE0,0x70,0x38,0x18,0x1C,0x0C,
    0x0E,0x07,0x03,0x03,0x01,0x81,0xE0,0x78,0x1C,0x0E,0x07,0x03,0x01,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x03,0x07,0x0E,0x1C,0x79,0xE1,0x83,
    0x03,0x07,0x0E,0x0C,0x1C,0x18,0x38,0x70,0xE0,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0xC0,0xC0,0xC0,
    0xC0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,
    0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,
    0xE0,0xE0,0xE0,0xC0,0xC0,0xC0,0xC0,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x80,0xF0,0x78,0x1E,0x07,0x03,0x81,0x80,0xC0,0xC0,0xC0,0xE0,0x60,
    0x60,0x60,0x70,0xF0,0xFE,0x3F,0x19,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
    0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x38,0x31,0x3F,
    0xFE,0xF0,0x60,0x60,0xE0,0xC0,0xC0,0xC0,0x80,0x81,0x03,0x07,0x1E,0x78,0xF0,0x80,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0xFC,0xFF,0x7F,0x07,0x0F,0x1F,0x3D,
    0x79,0x71,0xF0,0xE0,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,
    0x80,0xC0,0xE0,0xF0,0x71,0x79,0x3D,0x1F,0x0F,0xFF,0xFE,0xFC,0x00,0x00,0x00,0x00,
    0x00,0x80,0xFE,0xFF,0xF9,0x1C,0x0E,0x07,0x03,0x03,0x01,0x01,0x00,0x00,0x00,0x00,
    0x00,0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x01,0x01,0x03,0x03,0x07,0x0E,0x1C,0xF9,0xFF,
    0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x01,0x03,0x07,0x0F,0x0E,0x9E,0xFC,0xF8,0xF0,0xE0,0xC0,0xC0,0x80,
    0x00,0x00,0x00,0x00,0x00,0x80,0xC0,0xC0,0xE0,0xF0,0xF8,0xF8,0xFC,0x9E,0x0F,0x07,
    0x03,0x03,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,
    0x00,0x00,0x3F,0xFF,0xDF,0x38,0x70,0xE0,0xC0,0xC0,0x80,0x80,0x00,0x00,0x00,0x00,
    0x00,0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x80,0x80,0xC0,0xC0,0xE0,0x70,0x38,0xDF,0xFF,
    0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,
    0x80,0xC0,0xE0,0xF0,0x78,0x3C,0x1E,0x0F,0x07,0x03,0x01,0x00,0x01,0x01,0x03,0x07,
    0x0F,0x1E,0x1E,0x0E,0x0F,0x07,0x03,0x01,0x01,0x00,0x01,0x01,0x03,0x07,0x0F,0x1E,
    0x3C,0x78,0xF0,0xE0,0xC0,0x80,0x00,0x00,0x00,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x07,0x0F,0x3C,0x70,0xE0,0xC1,0x81,0x03,0x03,0x03,0x07,0x06,
    0x06,0x06,0x0E,0x0F,0x7F,0xFC,0x98,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
    0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x0C,0x8C,0xFC,
    0x7F,0x0F,0x06,0x06,0x07,0x03,0x03,0x03,0x81,0xC1,0xE0,0x70,0x3C,0x0F,0x07,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x1F,0x3F,0x7C,0xFC,0xFE,0xEF,
    0xE7,0xE3,0xE1,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,
    0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,
    0xE0,0xE0,0xE0,0xE1,0xE3,0xE7,0xEF,0xFE,0x7C,0x3F,0x1F,0x0F,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x03,0x07,0x0E,0x0C,0x1C,0x18,
    0x38,0x70,0x60,0xE0,0xC0,0xC1,0x87,0x9E,0xB8,0xF0,0xE0,0xC0,0x80,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xC0,0xE0,0xF0,0xB8,0xDE,0xC7,0xE1,
    0x60,0x70,0x38,0x18,0x1C,0x0C,0x0E,0x07,0x03,0x01,0x00,0x00,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x03,0x03,0x03,0x03,0x03,0x07,0x07,
    0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x03,0x03,0x03,0x01,0x01,0x01,0x01,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

    };

     

    示例程序

    聯系方式
    CONTACT US

    電話:0755-29784961-811/13316827640  小姐

    銷售QQ:2172598530/2415961763

    郵箱:2415961763@qq.com

    網址:http://www.www.sumanrai.com

    地址:深圳市寶安區西鄉街道簕竹角村天富安工業園5棟西2樓 


    關閉
    用手機掃描二維碼關閉
    一本香蕉一区二区三区,十八禁网站在线播放点击进入,曰韩高清一级毛片在线视频,欧美亚洲免费小视频